Skip to content

dtout

DekTec SDIOut

Register name used to load filter: dtout
This filter may be automatically loaded during graph resolution.

This filter provides SDI output to be used with DTA 2174 or DTA 2154 cards.

Options

bus (sint, default: -1): PCI bus number. If not set, device discovery is used
slot (sint, default: -1): PCI bus number. If not set, device discovery is used
fps (frac, default: 30/1): default FPS to use if input stream fps cannot be detected
clip (bool, default: false): clip YUV data to valid SDI range, slower
port (uint, default: 1): set sdi output port of card
start (dbl, default: 0.0): set playback start offset, [-1, 0] means percent of media dur, e.g. -1 == dur